Heat-resistant Conveyor Belts: Temperature, Cover Tests and Selection

Heat-resistant conveyor belts are selected for hot bulk materials in cement, steel, foundry and mineral-processing operations. The suitable construction depends on the actual heat exposure, material characteristics and conveyor design. A general-purpose rubber belt should not be assumed suitable for hot material.

Outdoor rubber belt conveyor supported by idlers in rocky terrain

Material Temperature and Belt Surface Temperature

Record the normal and peak temperature of the conveyed material separately from the belt surface temperature. Particle size, loading depth, contact time, belt speed, return-run cooling and enclosure conditions all affect heat transfer. A brief material-temperature peak does not establish a continuous belt operating limit.

Confirm the allowable continuous and intermittent conditions for the specific belt offered. This article does not assign a universal maximum temperature to EVER JOY belts. The quoted construction and supporting technical data must be reviewed for each application.

Cover Compound and Reinforcement

The heat-resistant rubber cover protects the load-carrying reinforcement. Fabric or steel cord construction, cover thickness and adhesion requirements must be selected together. A heat-resistant cover alone does not establish the temperature capability of the complete belt.

Heat resistance and flame-retardant performance are different requirements. If the application also requires abrasion, oil or fire resistance, include those conditions in the enquiry and agree the relevant tests.

Information Needed for Selection

  • Material type, particle-size distribution, moisture and abrasiveness.
  • Normal and peak material temperatures, measured belt surface temperature, and duration of hot loading.
  • Conveyor length, inclination, speed, throughput, enclosure and cooling conditions.
  • Belt width, strength rating, fabric or steel cord construction, cover thicknesses and splice requirements.
  • Required quantity, roll lengths, applicable test standard and destination port.

Confirm Ratings and Test Evidence

Grade names can differ between suppliers and specifications. Confirm what the grade refers to, the test method, exposure conditions and acceptance criteria. A laboratory ageing test temperature should not be read as an unrestricted service-temperature guarantee. Ask for the technical information and test documentation applicable to the offered belt.

ISO 4195:2026 evaluates the relative heat resistance of rubber covers through changes in hardness, tensile strength and elongation after heat exposure. Its scope requires a top cover at least 4 mm thick and excludes light conveyor belts. Referencing this method does not establish EVER JOY certification or a service-temperature rating for a particular belt.

Inspection and Maintenance

Inspect for hardening, cracks, cover wear, edge damage, splice deterioration and signs of separation. Have qualified personnel investigate unusual temperature increases or damage. Stop and isolate equipment before cleaning or adjustments, following the conveyor operator’s procedures.

Discuss Your Hot-material Application

Review our heat-resistant conveyor belt range and contact EVER JOY with your measured temperatures and belt specification. Final construction, operating limits and performance requirements should be agreed in the quotation and order specification.

en_USEnglish
Scroll to Top