China Conveyor Belt Factory
Focus on one-stop solutions for conveyor belt systems
Professional
Nylon Conveyor Belt
EP & NN Fabric Conveyor Belts | EVER JOY China Manufacturer
Request a quotation | WhatsApp +86 15175229655 | info@everjoyconveyor.com
Supply at a glance: EP100, EP150, EP200, EP300, EP400 and EP500 fabric grades; custom constructions from 1 to 10 plies; belt width up to 2,200 mm; top cover 2–20 mm and bottom cover 1.5–20 mm. The feasibility of any specific fabric, ply, width and cover combination is subject to technical confirmation.
1. EP vs. NN Conveyor Belts
| Feature | EP fabric carcass | NN nylon fabric carcass |
|---|---|---|
| Warp (longitudinal) | Polyester | Nylon (polyamide) |
| Weft (transverse) | Nylon (polyamide) | Nylon (polyamide) |
| Typical characteristics | Generally lower longitudinal elongation and good dimensional stability | Good flexibility; considered where impact absorption and bending performance matter |
| Selection factors | Working tension, take-up travel, pulley diameters, troughability and splicing | The same factors, with particular attention to working elongation and take-up capacity |
2. Fabric Grades, Plies and Belt Strength
2.1 EP Fabric Grade Series
| EP fabric grade | Nominal strength grade per fabric ply |
|---|---|
| EP100 | 100 N/mm |
| EP150 | 150 N/mm |
| EP200 | 200 N/mm |
| EP300 | 300 N/mm |
| EP400 | 400 N/mm |
| EP500 | 500 N/mm |
2.2 How to Read a Finished Belt Designation
For example, EP400/4 commonly denotes an EP carcass with a nominal finished-belt strength of 400 N/mm and four plies. Four EP100 plies are one typical fabric combination. These examples explain naming conventions. Simply multiplying a fabric grade by the number of plies is not proof of a finished belt’s tensile rating. The finished construction and its acceptance test requirements must be confirmed.2.3 Custom Manufacturing Range
| Parameter | EVER JOY supply information |
|---|---|
| Carcass | EP; specific NN fabric grades confirmed against the buyer’s specification |
| EP fabric grades | EP100, EP150, EP200, EP300, EP400, EP500 |
| Number of fabric plies | 1–10 plies, custom construction |
| Maximum manufacturing width | 2,200 mm |
| Top cover thickness | 2–20 mm, customizable |
| Bottom cover thickness | 1.5–20 mm, customizable |
| Overall belt thickness | Determined by fabric carcass, skim rubber and both covers |
| Roll length and weight | Based on the order, roll diameter, handling equipment and shipping limits |
| Edges and splices | Confirmed against the agreed edge construction and splice requirements |
Request a quotation | WhatsApp +86 15175229655 | info@everjoyconveyor.com
3. Typical Constructions and Cover Thickness
| Example construction | Plies | Top cover | Bottom cover | Approximate overall thickness |
|---|---|---|---|---|
| EP100 × 3 | 3 | 3 mm | 1.5 mm | Approx. 7.5 mm |
| EP100 × 4 | 4 | 4 mm | 2 mm | Approx. 10 mm |
| EP150 × 4 | 4 | 6 mm | 2 mm | Approx. 12–14 mm |
| EP200 × 4 | 4 | 6 mm | 2 mm | Approx. 13 mm |
4. Cover Rubber Grades and Standards
The following are reference performance requirements used to specify general-purpose rubber covers. They are not EVER JOY test results or an assertion that every belt is certified. All relevant characteristics and test methods must be considered.4.1 DIN 22102 Cover Grades
| Grade | Min. tensile strength | Min. elongation at break | Max. abrasion loss |
|---|---|---|---|
| W | 18 MPa | 400% | 90 mm³ |
| X | 25 MPa | 450% | 120 mm³ |
| Y | 20 MPa | 400% | 150 mm³ |
| Z | 15 MPa | 350% | 250 mm³ |
4.2 ISO 10247 and Chinese GB/T 7984 Cover Grades
| Standard / grade | Min. tensile strength | Min. elongation at break | Max. abrasion loss |
|---|---|---|---|
| ISO 10247 — H | 24 MPa | 450% | 120 mm³ |
| ISO 10247 — D | 18 MPa | 400% | 100 mm³ |
| ISO 10247 — L | 15 MPa | 350% | 200 mm³ |
| GB/T 7984 — H | 24 MPa | 450% | 120 mm³ |
| GB/T 7984 — D | 18 MPa | 400% | 100 mm³ |
| GB/T 7984 — L | 15 MPa | 350% | 200 mm³ |
4.3 Other Regional Requirements
| Market | Standard or grading system that may be specified |
|---|---|
| Russia and GOST-based projects | GOST 20-2018; belt type and application requirements must be agreed |
| Australia | AS 1332; common cover grades include M and N |
| India | IS 1891; common grades include M24 and N17 |
| United States | Relevant RMA/ARPM specifications and contract requirements |
| Japan | JIS K 6322 and other applicable specifications |
5. Quality Control and Manufacturing
Depending on the project specification, inspection may cover finished belt tensile strength, elongation at reference load, cover tensile strength and elongation, abrasion, cover-to-ply adhesion, ply-to-ply adhesion, width and thickness. The actual test scope, results and documents available for an order must be confirmed. EVER JOY’s production base is in Guzhen County, Bengbu, Anhui Province, China. The factory occupies approximately 140 mu (9.33 hectares), with an overall production capacity of approximately 20,000 linear metres per day and a maximum manufacturing width of 2,200 mm. Order lead time and feasible constructions depend on the confirmed specification. Available delivery terms may include EXW factory, FOB agreed Chinese loading port and FCA Horgos, subject to the order. Packing, roll diameter, per-roll weight and transport routing are agreed for the shipment.6. Industries and Selection Considerations
| Application | Conditions to review |
|---|---|
| Mining and quarries | Lump size, sharp edges, abrasion and loading impact |
| Crushing and screening plants | Impact loads, particle size, pulley diameter and working tension |
| Cement and building materials | Limestone, clinker, dust, load and actual material temperature |
| Ports and bulk terminals | Continuous duty, handling constraints, roll mass and moisture |
| Power and industrial facilities | Coal, minerals, bulk materials and applicable safety requirements |
7. Send Your Specification for a Quotation
Please provide the following details to start a technical review and quotation:| Purchasing detail | Example |
|---|---|
| Width | 1,000 mm |
| Carcass and finished belt rating | EP400/4 (example) |
| Top and bottom covers | 4 mm / 2 mm |
| Overall thickness | State separately if required |
| Cover grade | DIN-Y (example requirement; subject to confirmation) |
| Quantity and rolls | 500 m total; 100 m per roll |
| Material handled | Limestone |
| Destination | Country, city or destination port |
Request a quotation | WhatsApp | info@everjoyconveyor.com
For EP-only selection, see our EP Fabric Conveyor Belts page.8. Frequently Asked Questions
What is the difference between EP100 and EP400/4?
EP100 commonly identifies a nominal strength grade of one EP fabric ply. EP400/4 typically denotes a finished carcass rated at 400 N/mm with four plies. The finished rating must still be verified under the agreed specification.Can you manufacture 1–10-ply conveyor belts?
Constructions from 1 to 10 plies can be discussed. Not every fabric grade, width and cover combination is feasible; technical confirmation is required.What are your custom top and bottom cover thickness ranges?
Top covers can be specified from 2 to 20 mm and bottom covers from 1.5 to 20 mm, subject to the chosen carcass and manufacturing feasibility.Which is better, EP or NN?
Neither is universally better. EP generally has lower longitudinal elongation; NN generally offers good flexibility. Working tension, take-up, impact and pulley conditions determine suitability.Does the standards table mean your products are certified to all listed grades?
No. The table presents reference requirements. The supplied compound grade, test results and documentation must be agreed for the specific order.How can I receive a faster quotation?
Send belt width, finished rating or ply count, top and bottom covers, quantity and destination. Existing belt photos or drawings are helpful. EVER JOY | Industrial Rubber Conveyor Belt Manufacturer in ChinaRelated Products
View All ProductsEVER JOY
Conveyor belt manufacturing and international trade — Bengbu, Anhui, China.
Factory Site Area
Factory in Bengbu, Anhui
Daily Production Capacity
Approximate Site Area
Quality Conveyor Belt
Contact us for professional yet targeted product recommendations and quotes.
Factory Visit
EVER JOY welcomes customers from all over the world to visit our production workshop.
EVER JOY Latest Blog
Conveyor belt selection guides and purchasing advice for mining, quarrying, cement and bulk material handling.
Nylon conveyor belts, commonly designated NN, use nylon fabric reinforcement in a rubber belt construction. They are an option for […]
EVER JOY Factory Show
Our conveyor belt factory is located in Guzhen County, Bengbu City, Anhui Province, China. The site covers 140 mu (approximately 93,333 square metres), with a daily production capacity of 20,000 metres.
EVER JOY integrates manufacturing and international trade, supporting overseas buyers with specification review, production coordination, inspection documentation and shipment arrangements. Factory visits are welcome by appointment.
Conveyor Idlers & Idler Sets
Conveyor Drum Pulleys