EVER JOY
Conveyor Idler Frames & Brackets
Steel Supports for Troughing, Return and Impact Idler Sets

1. Product Scope and Applications
EVER JOY supplies steel idler frames and matched idler assemblies for bulk-material belt conveyors. Options cover three-roll troughing frames, flat and V-return supports, impact-zone and self-aligning arrangements. Frame geometry, mounting pitch, shaft-end slots, welding and surface finish are matched to the selected conveyor series or approved customer drawing. Applications include mining, aggregates, cement plants, ports and conveyor refurbishment.
| Supply | Series | Customization |
|---|---|---|
| Frames only or matched idler sets | TD75 / DTII / DTII(A) | Drawing, existing unit or sample |
Carrying section | Three-roll frames form a trough to support the belt and bulk material.
Loading / impact zone | Frames may be combined with appropriate impact idlers; load rating is design-specific.
Return and tracking | Flat return, V-return and self-aligning frame arrangements match the conveyor layout.
2. Frame Types and Configuration
TD75, DTII and DTII(A) configurations can be considered when matching a frame to an existing conveyor. Equal belt width does not mean the mounting locations, trough angle or shaft-end seats are interchangeable; confirm against the original equipment drawing.

For training-type arrangements, confirm the pivoting mechanism, stops and mounting interfaces against the equipment drawing; visual appearance alone does not establish interchangeability.

Frame and matching rollers supplied as a package for replacement projects.

Wing and centre supports and crossbeam geometry must match roller shaft ends and the specified trough angle.

Beam sections and stiffeners depend on loads and the duty cycle; appearance alone cannot establish rating.
3. Real Product Photos


4. Frame Structure and Mounting Interfaces
“800 mm / 35°” alone is not a sufficient replacement specification. The approved drawing must define frame interfaces, especially bolt centres, total width, shaft-seat geometry and trough angle.
Information Needed for Frame Matching
To match existing equipment, provide belt width, frame type and trough angle, roller diameter and face length, shaft-end design, overall frame width and height, bolt-hole pattern, support slot details, steel grade and surface finish. Final manufacturing dimensions are subject to the approved project drawing.
Key Frame Elements
- Cross beam / base: Connects the supports to the conveyor stringer.
- Wing and centre supports: Locate the three rollers and establish trough geometry.
- Shaft-end slots: Must fit shaft flat width, thickness and seating depth.
- Mounting plates: Check slotted-hole form, bolt pattern and mounting clearance.
- Stiffeners and welds: Specified according to structural loading and welding design.
5. Fabrication, Inspection and Surface Finish
Steel frames are fabricated to the confirmed drawing. Inspections and acceptance limits should be defined in the technical agreement and applicable project standards. The items below are possible inspection checkpoints, not claims of existing third-party certification.


Suggested Inspection / Acceptance Checkpoints
| Inspection item | Scope |
|---|---|
| Dimensions and fit | Overall width, bolt pattern, shaft slots, support height and trial fit with rollers |
| Weld and structure | Weld appearance, control of cracking / lack of fusion and NDT if specified |
| Assembly geometry | Trough angle, roll axis location, belt clearance and free movement |
| Finish and protection | Paint condition, coating thickness or specified galvanizing requirements |
| Marking and records | Model, quantity, packing labels and agreed inspection documents |
Finishes may include industrial paint, powder coating or project-specific galvanized treatment. Select the protection system for the site environment and confirm availability in the order; no option is implied to be always in stock.
6. Standards and Engineering Basis
| Standard / Basis | Relevant scope |
|---|---|
| GB/T 10595-2017 | General belt-conveyor requirements, including metalwork, welding and coatings. |
| ISO 1537:1975 | Three-roll troughed-conveyor idler dimensions, arrangement and clearance; not a standalone frame certification. |
| CEMA 502-2022 | Dimensional and selection principles for troughing and return idlers as relevant to CEMA projects. |
| TD75 / DTII(A) drawings | Define the actual support interfaces where those equipment series apply. |
7. Frequently Asked Questions
01 Are TD75 and DTII(A) frames interchangeable?
Not automatically. Check the overall mounting dimensions, bolt pitch, roller length, trough angle and shaft-seat slots.
02 Can I order frames without rollers?
Frames can be specified separately, or quoted together with compatible rollers. Clarify what is included in the order.
03 How is the trough angle selected?
Follow the conveyor design. Common 20°, 35° or 45° examples are not interchangeable based on belt width alone.
04 Can photos replace a technical drawing?
Photos help identify the type, but key dimensions and shaft-end details must still be measured.
05 Can an impact frame replace a standard carrying frame?
Not without checking impact loads, roller spacing and the overall support design.
06 Are painting and galvanizing options available?
Finish and corrosion-protection requirements can be specified in the order and accepted against agreed criteria.
07 How do I check compatibility with existing rollers?
Provide roller OD D, shell length L, overall shaft length S, shaft flats and the old support drawing.
08 Can inspection documents be provided?
Drawing confirmation and inspection deliverables can be agreed per order; third-party tests or certification must be requested explicitly.
Request a Quotation
Send the frame series (TD75 / DTII / DTII(A) / other), belt width, trough angle, roller D×L and shaft length, frame width and height, bolt pitch and shaft-seat details, material / surface finish, quantity and destination. Attach a drawing or photos of the existing unit.
Production and export support | Manufactured in Anhui, China. EVER JOY coordinates drawing review, roller matching, packing and export communication.



