EVER JOY · CONVEYOR COMPONENTS | PRODUCT OVERVIEW

Impact Idler Rollers & Idler Sets

Русский

Rubber-ring cushioning for conveyor loading zones | Replacement fit & drawing-based supply

WHAT BUYERS CAN REQUEST

  • Complete impact idler rollers
  • Three-roll impact sets to drawing
  • Replacement fit using shaft-end photos
Three-roll impact idler assembly shown. Dimensions and supply scope are confirmed for each order.
Three-roll impact idler assembly shown. Dimensions and supply scope are confirmed for each order.

1. Product Overview

EVER JOY supplies rubber-ring impact idler rollers, three-roll impact troughing sets and replacement impact rings for belt-conveyor loading and transfer points. Resilient rings fitted around a steel roller help cushion material impact on the belt. Suitability depends on drop height, lump size, belt speed, duty and the dimensions of the existing conveyor structure.

For a faster quotation, send belt width, rubber-ring OD D1, roller face length L, overall shaft length S, shaft-end photo and quantity.

2. Select the Correct Supply Scope

A replacement rubber ring, a complete impact roller and a framed idler set are different purchase items. Confirm the supply scope before requesting a price.

SUPPLY OPTIONTYPICAL CONTENTKEY DIMENSIONS TO CONFIRM
Complete impact rollerRubber-ring-covered shell, shaft, bearings and sealing componentsD1/D2, L, S, shaft-end detail, bearing and fit
Three-roll impact idler setNormally three impact rollers plus the matching frame, if specifiedBelt width, trough angle, mounting holes and frame height
Replacement impact ringsSeparate rubber cushioning rings supplied to specificationRing OD, bore ID, width, compound/hardness and quantity

3. Product Photos & Identification

Photos show different assembly and packing stages. Please specify whether you need complete rollers, replacement rings or an idler set with frame.

4. Dimensions: Confirm the Fit Before Ordering

Belt width alone does not determine a replacement idler. Match the rubber OD, steel shell, roller face, overall shaft length and shaft-end connection to the existing frame.

Schematic only: D1 = outer rubber-ring diameter; D2 = steel shell diameter; L = roller face length; S = end-to-end shaft length.
Schematic only: D1 = outer rubber-ring diameter; D2 = steel shell diameter; L = roller face length; S = end-to-end shaft length.
CODEMEANINGWHAT THE BUYER SHOULD PROVIDE
D1Rubber-ring outside diameterState separately from steel tube OD D2
D2Steel roller shell diameterControls ring bore and shell construction
LRoller shell / ring-covered face lengthIdentify where the measurement starts and ends
SOverall shaft length, end to endCritical for replacement mounting fit
dShaft and shaft-end diameterShow each step for stepped shafts
E₁/E₂Left / right shaft projectionsState separately if unequal
FShaft-end flat or slot-fitting dimensionAdd an end-view photo or drawing
b / pRing width / ring pitchSpecify when buying separate rings

5. Typical Industry Reference Sizes (mm; not a stock list)

PARAMETERREFERENCE VALUES
Ring OD D1Ø89 / 108 / 133 / 159 / 194 / 219
Steel shell OD D2Ø63.5 / 76 / 89 / 108 / 133
Shaft diameter dØ20 / 25 / 30 / 35 / 40
Trough angles20° / 30° / 35° / 45°
These sizes are preliminary selection references, not confirmed stock. Exact dimensions, bearing arrangement, rubber compound and availability are agreed against the drawing and purchase specification.

6. Application, Inspection & Delivery

A loading zone imposes dynamic impact as well as material weight. State the real operating conditions before selecting shell, shaft, bearings, seals and frame.

Operating Data for Proper Selection

TOPICBUYER INFORMATION
Material impactMaterial type, maximum lump size, drop height, bulk density and loading method
Conveyor dataBelt width and speed, trough angle, idler spacing and expected duty
Replacement fitExisting drawing/photo, shaft-end form, frame hole centres and mounting height
Site conditionsDust, water, temperature, corrosive media, duty cycle and servicing

Inspection Items to Agree on the Order

INSPECTIONAGREED CHECK
Dimensions & interchangeabilityD1, D2, L, S, d, shaft ends and frame fit
Rubber cushioning ringsAppearance, hardness if agreed, cracking, spacing and fixation
Roller rotation & bearingFree rotation, runout, abnormal noise and axial movement
Seals & packingSealing requirements, finish, corrosion protection, shaft-end protection and labels
Sampling, inspection methods and acceptance criteria are agreed in the purchase specification.

7. Applications & Maintenance

Common applications include aggregate crushing, mining transfer points, cement works, coal handling and ports. Severe drop conditions may also call for review of chute design, idler spacing or an impact bed. Inspect rubber-ring cracks, abnormal wear, seized rollers and bearing noise. Isolate and lock out the conveyor before any replacement work.

8. Buyer FAQ

How is an impact idler different from a standard carrying idler?

Impact rollers have cushioning rubber rings for loading and transfer points; ordinary carrying idlers mainly support the belt during normal travel.

Can I order using belt width only?

No. It is a starting point, not a complete specification. Confirm L, S, shaft ends, trough angle and frame geometry.

Do all pictured items include shafts and frames?

No. Complete rollers, framed sets and loose rings have different scopes of supply. Specify exactly what you need.

Can you match an existing conveyor?

Send an approved drawing or existing roller dimensions and photos. Shaft-end flats, projections and slots are particularly important.

Is harder rubber always better?

Not necessarily. Compound, hardness, abrasion, impact severity and site conditions should be selected together.

What should be fixed before production?

Agree drawing revision, supply scope, inspection criteria, packaging and acceptance requirements in writing.

9. RFQ Checklist

Send These Details for a Reliable Quotation

  • 1 Scope: single roller / three-roll set / loose rings
  • 2 Belt width, belt speed, material and drop height
  • 3 D1 / D2 / L / S / d / shaft-end flat F
  • 4 Trough angle, frame hole centres and drawing/photo
  • 5 Quantity, application and destination country/port

10. Contact EVER JOY

Contact EVER JOY | Attach a drawing or photos of your existing idler to help avoid an incompatible replacement.

WhatsApp: +86 15175229655 · info@everjoyconveyor.com

en_USEnglish
Scroll to Top